Characteristics of SRS & SR TYPE Sludge Remover in comparison with the Conventional Separator/Strainer | ||||
Description | Sludge Remover | Conventional Separator/Strainer | ||
---|---|---|---|---|
Separation | Hydro-Cyclone | Mesh & Filter | ||
Construction | Simple | Complex | ||
Pressure Loss | Constant & Little | Variable | ||
Maintenance | Nearly No-Need | Much for Change,Repair & Cleaning | ||
Operarion Cost | Nearly No-Cost | Much |
Pressure Loss of SRS & SR Type Sludge Remover(ΔP) | |
SRS Type Sludge Remover | SR Type Sludge Remover |
1~2 m Pressure Loss should be designed 1 to 2 m in accordance with Suction level and NPSHreq. |
![]() |
Expectable Separation of SRS & SR Type Sludge Remover(%) | Example:Sand(Gravity 2.5) in Water |
SRS Type Sludge Remover | SR Type Sludge Remover |
90% at 500 μm over size | At Single use : 95% at 75μm over size At Tandem use: 95% at 45μm over size |
Separation efficiency is not guaranteed because of it is different from sludge conditions in the water or liquids such as gravity, concentration, distribution and so on, and operation conditions such as viscosity and flow rate. |
Remarks
1) These SRS shows Water use specification by JIS 10K.
2) In case of other liquid except Water, please show the specification for SRS
3) Legs, Inlet Nozzle and Drain arrangement for SRS shall be decided by negotiation.
Type |
N-1/N-2 |
N-3 |
Approximately Dimension |
Weight (Kg) |
A |
B |
C(Φ) |
D |
SRS-01 |
R1 |
By Negotiation |
200 |
42.5 |
65A |
By Negotiation for errosion |
12 |
SRS-01.25 |
R1-1/4 |
255 |
55 |
80A |
15 |
||
SRS-01.5 |
R1-1/2 |
320 |
70 |
100A |
20 |
||
SRS-02 |
50A |
400 |
85 |
125A |
40 |
||
SRS-02.5 |
65A |
520 |
110 |
150A |
60 |
||
SRS-03 |
80A |
640 |
135 |
200A |
100 |
||
SRS-04 |
100A |
800 |
170 |
250A |
150 |
||
SRS-05 |
125A |
1000 |
215 |
300A |
300 |
||
SRS-06 |
150A |
1200 |
250 |
400A |
500 |
||
SRS-08 |
200A |
1600 |
340 |
500A |
600 |
||
SRS-10 |
250A |
2000 |
425 |
600A |
700 |
||
SRS-12 |
300A |
2400 |
510 |
750A |
1000 |
||
SRS-14 |
350A |
2800 |
600 |
900A |
1400 |
||
SRS-16 |
400A |
3200 |
680 |
1000A |
1600 |
||
SRS-18 |
450A |
3600 |
770 |
1100A |
2200 |
||
SRS-20 |
500A |
4000 |
850 |
1200A |
2700 |
Large size SRS more than SRS-20 shall be designed by the requirement each time.
Type |
Flow Range |
N-1/N-2 |
N-3 |
Approximately Dimension |
|||
M3/Hr |
A |
B |
C(Φ) |
By Negotiation for errosion |
|||
SR-01 |
4.5-7.5 |
R1 |
By Negotiation | 950 |
180 |
125A |
|
SR-01.25 |
6_16 |
R1-1/4 |
1150 |
200 |
150A |
||
SR-01.5 |
10_20 |
40A |
1250 |
270 |
200A |
||
SR-02 |
14-30 |
50A |
1400 |
300 |
200A |
||
SR-02.5 |
20-35 |
65A |
1500 |
350 |
250A |
||
SR-03 |
32-64 |
80A |
1600 |
350 |
250A |
||
SR-04 |
65-125 |
100A |
2100 |
400 |
250A |
||
SR-05 |
110-200 |
125A |
2750 |
450 |
350A |
||
SR-06 |
165-275 |
150A |
3200 |
500 |
400A |
||
SR-08 |
230-380 |
200A |
3600 |
600 |
500A |
||
SR-10 |
375-705 |
250A |
3750 |
650 |
600A |
||
SR-12 |
560-990 |
300A |
4300 |
820 |
700A |
||
SR-14 |
670-1240 |
350A |
5100 |
1000 |
800A |
||
SR-16 |
890-1680 |
400A |
5800 |
1150 |
900A |
||
SR-18 |
1180-2090 |
450A |
6700 |
1300 |
1000A |
||
SR-20 |
1785-2895 |
500A |
7300 |
1500 |
1200A |
||
SR-22 |
2137-3500 |
550A |
7950 |
1700 |
1300A |
||
SR-24 |
2540-4200 |
600A |
8300 |
1900 |
1400A |
Type |
Max. Particle Size (mm) | Accumlate Volume (L) |
Weight (Kg) |
SR-01 |
10 |
7 |
60 |
SR-01.25 |
10 |
7 |
70 |
SR-01.5 |
10 |
10 |
80 |
SR-02 |
15 |
17 |
100 |
SR-02.5 |
15 |
20 |
110 |
SR-03 |
20 |
22 |
130 |
SR-04 |
20 |
30 |
300 |
SR-05 |
20 |
30 |
400 |
SR-06 |
20 |
30 |
750 |
SR-08 |
30 |
65 |
900 |
SR-10 |
30 |
135 |
1300 |
SR-12 |
35 |
170 |
1800 |
SR-14 |
40 |
200 |
2100 |
SR-16 |
45 |
260 |
4500 |
SR-18 |
50 |
290 |
6000 |
SR-20 |
50 |
415 |
7200 |
SR-22 |
50 |
450 |
8500 |
SR-24 |
50 |
500 |
9000 |
Remarks
1)These SR shows Water use specification by JIS 10K.
2)In case of other liquid except Water, Please show the specification for SR
3)SR-04~SR-24 are inclinatable from 90° to Max.22,5° optionally.
Remarks
1) By Sludge concentration or Customer's requirement, SR shall be designed with Liner inside body for errosion.
2) SR & SRS are applicable for every liquid. Please contact to us.
Please enter the data in below blank.
Type of Sludge Remover | SRS Type | SR Type | |||
Service | |||||
Liquid | Name | ||||
Viscosity | |||||
Gravity | |||||
Sludge | Name | ||||
Gravity | |||||
Size Range | |||||
Pump | Capacity(M3/Hr) | ||||
Suction Pipe Size | |||||
Suc. Pipe Material | |||||
NPSH req (m) | |||||
Suc. Level | Show additional sketch | ||||
Design Flow (M3/Hr) | |||||
Design Pressure (MPaG) | |||||
Design Temperature(℃) | |||||
Flange Rating | |||||
Corrosion Allowance | |||||
Recovery Tank | Operation | Manual | Auto | Manual | Auto |
Tank Volume (M3) | |||||
Others | |||||
Utilities | Ele. Source Cont. Air Steam Others |